| ATG/BTG Torque Gauge | | |
| | | |
| | For measurement of micro torquecalibration of torque tools. | |
| | | |
| |  | |  |  | TGTCL Calibration Kit for ATG/ BTG | | | |
| | Select proper model according to unit of measure as following color code : | |
| | | S.I. = | | | Metric = | | | American = | | | Accuracy ±2% | |
| | | Model | Torque Range | Overall Lgth. | Outside Diameter | Chuck Grip | Weight Approx | | S.I. | Metric | American | Min.-Max. | Graduation | | S.I. | Metric | American | S.I. | Metric | American | mm | in. | mm | in. | mm | in. | kg | oz. | | ATG045CN | 45ATG | ATG06Z | cN.m 0.05-0.45 | gf.cm 5-45 | in.oz 0.06-0.60 | cN.m 0.01 | gf.cm 1 | in.oz 0.01 | 90 | 3- 7/8 | 43.5 | 1 23/32 | ?1 ~ ?6.5 | 3/64 ~ 1/4 | 0.18 | 6 3/8 | | ATG09CN-S | 90ATG-S | ATG1.5Z-S | 0.1-0.9 | 10-90 | 0.2-1.5 | 0.02 | 2 | 0.02 | | ATG1.5CN-S | 150ATG-S | ATG2.4Z-S | 0.2-1.5 | 20-150 | 0.3-2.4 | 0.05 | | ATG3CN-S | 300ATG-S | ATG4.5Z-S | 0.3-3 | 30-300 | 0.5-4.5 | 0.05 | 5 | 0.1 | | ATG6CN-S | 600ATG-S | ATG9Z-S | 0.6-6 | 60-600 | 1-9 | 0.1 | 10 | 0.2 | | ATG12CN-S | 1200ATG-S | ATG18Z-S | 1-12 | 100-1200 | 2-18 | 0.2 | 20 | 0.5 | | ATG24CN-S | 2400ATG-S | ATG36Z-S | 3-24 | 300-2400 | 4-36 | 0.5 | 50 | | - | - | BTG60Z-S | - | - | 6-60 | - | - | 1 | 118 | 5 9/32 | 64.2 | 2 17/32 | ?1 ~ ?8.5 | 3/64 ~ 11/32 | 0.52 | 18 3/8 | | BTG120Z-S | 10-120 | 2 | | BTG15CN-S | 1.5BTG-S | 1.5BTG-A-S | 2-15 | kgf.cm 0.2-1.5 | in.lbs 0.1-1.5 | 0.2 | kgf.cm 0.02 | in.lbs 0.02 | | BTG24CN-S | 2.4BTG-S | 2.4BTG-A-S | 3-24 | 0.3-2.4 | 0.3-2.4 | 0.5 | 0.05 | | BTG36CN-S | 3.6BTG-S | 3.6BTG-A-S | 4-36 | 0.4-3.6 | 0.4-3.6 | 0.05 | | BTG60CN-S | 6BTG-S | 6BTG-A-S | 6-60 | 0.6-6 | 0.6-6 | 1 | 0.1 | 0.1 | | BTG90CN-S | 9BTG-S | 9BTG-A-S | 10-90 | 1-9 | 1-9 | | BTG150CN-S | 15BTG-S | 15BTG-A-S | 20-150 | 2-15 | 2-15 | 2 | 0.2 | 0.2 | | |
| |  | |
| | - Memory pointer on sideon top of dial face ��not shown in picture��are standard
- ATG-S overall length with top pointer is 4-1/16"
- ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
- ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. ��Plastic chuck is shown in the photo above��
|
