sp10供應鐵素體含量檢測儀sp10

車輛測試設備

該公司產品分類：涂裝儀器儀表環保儀器儀表設備診斷儀器分析儀器計量標準儀器建工建筑檢測儀器無損檢測儀器

ZDR-CTJ二氧化碳檢測儀

二氧化碳檢測控制儀技術參數：測量范圍：0～2000ppm或0～5000ppm 測量精度：±40ppm 控制范圍：0～2000ppm或0～5000ppm 分辨率：10 ppm 傳感器：紅外

系統參數說明（例0～2000ppm）：１、工作電源：AC 220/50 HZ；２、輸入模擬量信號范圍：0～5.75 VDC；３、輸出模擬量信號范圍：0～5.75 VDC；４、測試CO2量程：0～1999 PPM；５、設置參數范圍：　上限范圍： 1~2000 PPM；下限范圍： 1~1999 PPM；６、開關量帶載能力：　DC 12V 3W；

氣體檢測儀，艾克賽普精密測控的產品說明信息可能還不夠細致和，如果您需要更詳細了解氣體檢測儀,艾克賽普的相關信息或索取相關資料，歡迎隨時與我聯系！聯系人：肖工聯系電話：艾克賽普專業銷售氣體檢測儀，銷售熱線：。氣體檢測儀是利用氣體傳感器來檢測環境中存在的氣體種類的儀器，氣體檢測儀用來檢測氣體的成份和含量。通常人們將氣體檢測儀定義為一種氣體泄露濃度檢測的儀器儀表工具，主要是指便攜式/手持式氣體檢測儀。艾克賽普精密測控有限公司主要提供價格優惠的熱像儀、萬用表、測振儀、示波器、氣體檢測儀、水質分析儀等實用測試儀器設備。經營美國福祿克FLUKE、安捷倫、FLIR、日本日置HIOKI、共立KYORITSU、理音RION、菊水等知名品牌。http://www.hncsw.net氣體檢測儀產品信息地址：http://www.hncsw.net/product/Gas/

該公司產品分類：示波器數字萬用表福祿克FLUKE 溫度計 校準器差壓模塊液壓測試測試軟管鉗表萬用表兆歐表絕緣測試儀熱電偶測試泵壓力泵壓力模塊測試儀風速儀

testo265德國德圖testo食用油品質檢測儀testo265德國德圖testo食用油品質檢測儀

testo265德國德圖testo食用油品質檢測儀

testo 265 食用油品質檢測儀訂貨號:0563 0265 簡要描述 testo 265 食用油品質檢測儀，包括護套、扣件、傳感器護罩和鋁箱產品介紹：性高、降低成本食用油的品質直接影響食品的質量和價值。經頻繁使用的食用油會導致異味、惡心和不適。但是過早更換食用油，又會導致不必要的經濟損失。使用testo 265食用油品質檢測儀可檢測食用油可使用的最大限度，替您節省開支。操作簡便測量直接在熱油中進行。食用油的品質和溫度會在10秒鐘內顯示于顯示器上。當超過用戶設定的限值時，會發出LED報警。創新傳感器testo 265中最重要的部分就是Testo的創新適用于傳感器。通過這個傳感器，測量直接在熱油中進行，這說明品質檢測可直接在廚房烹調過程中快速地進行?？梢粋€(gè)接一個的測量多個煎鍋，無需等待傳感器冷卻。品質和溫度檢測的精度通常為2%。安全特性：報警功能 testo 265所帶有的報警功能，具有許多好處。當超過用戶設定的限值（如18和24 %TPM）時，LED顯示燈會呈現出黃色或紅色。通過這個方法，測量工作就顯得相當明確，比如，出現黃燈時告知廚房經理更換食用油。又堅固檢測儀在配上保護軟套以及可拆卸的探頭保護帽后非常堅固耐用。這兩個部件可用洗碗機清洗。優點一覽工業廚房、膳食業 控制食用油利用率。到達限值時更換。避免因超過質量限值而導致的對健康的影響或處罰檢測食品快速地現場測量，為您省去了高昂的實驗室測量費用食品業 設定理想的限值快速地檢測食用油品質 保護軟套，可直接用水清洗

技術數據 - testo 265 存儲溫度 -20.0...70.0 °C 操作溫度 40.0...210.0 °C 電池類型

泄漏電流測試儀.泄漏電流測試機.泄漏電流檢測儀

性能特點： 1、測試電壓、泄漏電流、測試時間同時顯示 2、測試報警值可連續任意設定 3、相位自動轉換 4、超限聲光報警 5、靈活的一體式和分體式結構適合于各種容量的檢測設備技術指標：型號 LK2675A LK2675B LK2675C LK2675E 變壓器 300VA 1000VA 2000VA 外接調壓器型尺寸 375×195×280mm 375×195×280mm 435×230×425mm 350×135×280mm 輸出電壓 0～250V± 5% 漏電流范圍 0～2/20mA 測試時間 1～99s 度 ±5% 溫度/濕度 00оC～40оC≤75%RH 標準附件 ———————————————

磷化氫檢測報警儀

無

ICP0212蛋白激酶A活性檢測試劑盒PKA Kinase Assay Kits, Type I

關于 PKA Kinase Assay Kits, Type I 的詳細介紹

Catalog # ICP0216

KIT COMPONENTS

1. PKA substrate plate: a 96 well plate with 12x8 removable strips. Each well was pre-immobilized with 50μL of PKA-substrate (KRREILSRRPSYR).

2. Anti-pSub (pCreb) antibodies (rabbit, affinity purified): 1μg/mL, 5mL.

3. Kinase Assay Dilution buffer: 10mL.

4. Antibody dilution buffer: 10mL.

5. Goat anti-rabbit IgG HRP conjugates: Catalog# ICP9803, 0.5mg/mL in HRP stabilizing buffer, 30μL. Dilute to 0.5μg/mL (1:5000 dilution) with antibody dilution buffer (D) as working solution.

6. Adenosine tri-phosphate (ATP): 2mg. Reconstitute with 2mL kinase assay dilution buffer (C) as working solution. Once it is dissolved in the buffer, store at -20ºC for better stability.

7. Peroxidase substrate: 10mL, TMB (3,3＇-5,5＇-Tetramethylbenzidine).

8. Stop solution: 10mL.

9. 10x PBSt: 10mL.

KIT DESCRIPTION

Quality control: The kits were tested using PKA from Sigma (#P5511). Sensitivity is approximately 100ng of PKA/assay.

Storage ａnd Stability: Stable for 6 months at 4ºC from date of shipment. Avoid the light ａnd heat.

Descriptions: PKA is a cyclic AMP dependent protein kinase. The PKA kinase assay kit (Type I) is a non-radioactive, homogenous, simple, rapid, antigen-captured immunosorbent assay. This assay is designed for the assay of PKA in solution. The principle of the assay is simple. Purified or partially purified PKA will phosphorylate the PKA substrate on the 96-well plate with the presence of ATP. The phosphorylated substrate (pSubstrate) is then analyzed with the anti-phosphosubstrate antibodies. Subsequently, the binding anti-pSub antibodies will be quantified with the secondary antibody-HRP conjugate, which generates the color signal from its substrate, TMB (OD at 450 nm). The final color intensity is proportional to the initial PKA phosphorylation activity.

SUMMARY OF THE ASSAY

1. Kinase reaction: KRREILSRRPSYR + ATP + Kinase → KRREILSRRPpSYR

2. The phosphorylated substrate on the plate will be detected with an anti-pSubstrate antibody: KRREILSRRPSYR (no antibody binding), KRREILSRRPpSYR (antibody binds to the plate)

3. Signal Generation: Secondary antibody binds to antibody-KRREILSRRPpSYR complex formed on the plate.

PROTOCOL

1. Soak the well of the substrate plate (component A) with 50μL of kinase assay dilution buffer (component C) for 10 mins, then aspirate.

2. Prepare purified or partially purified PKA or PKA-inhibitor mixture in 30μL of the kinase assay dilution buffer to the well of the substrate plate as prepared in step 1 (Note: For preparation of the positive control, refer to the Appendix)

3. Add samples to the appropriate wells.

4. Add 10μL of the ATP (component F) solution to the wells to initiate the kinase reaction at 30-35ºC for 90 mins. Hand-shake the strip every 20 mins. If a shaker with rotate angle is applied, the speed arranged at 60 rounds per min should be adequate.

5. Empty the wells then add 40μL of the anti-pSubstrate antibodies (component B) at room temperature for 60 mins. Shake every 20 mins.

6. Empty the wells ａnd fill the well with 100μL of PBSt washing buffer. Let the washing buffer stay for 1-2 mins then aspirate. Repeat this washing step four times.

7. Add 40μL of goat anti-rabbit IgG HRP (component E) working solution to the well ａnd incubate at room temperature for 30 mins. Shake the wells every 10 mins.

8. Empty the wells ａnd repeat the washing as step 6.

9. Add 60μL of TMB to develop the color (for 30-60 mins).

10. Stop the reaction with 20μL of the stop solution (2 N HCl).

11. Calculation of the relative kinase activity: OD (sample)-OD(negative)/ng of kinase

QUALITY CONTROL TEST

Assay for activity of PKA (Sigma#P5511, lot#108H7846)

Activity, transfer 1 picomole of phosphate to kemptide/min/μg of protein.

APPENDIX

Preparation of Positive Control

Sample Preparation of Recombinant Kinase

1. Label 5 microfuge tubes; 1-4, plus a negative control. Note: The negative control should only contain assay dilution buffer; no kinase.

2. Aliquot 38μL of assay dilution into tube#1 ａnd 30μL into tubes 2-4.

3. Add 2μL of recombinant kinase into tube#1 ａnd mix thoroughly.

4. Transfer 10μL from tube#1 to tube#2 ａnd mix.

5. Transfer 10μL from tube#2 to tube#3 ａnd mix.

6. Transfer 10μL from tube#3 to tube #4 ａnd mix.

7. Transfer 30μL from each of the mixtures (tubes 1-4 plus the control) into the appropriate wells of the substrate plate.

本公司還提供以下相關優質產品：

產品名稱（中文）*	產品名稱（英文）	品牌*	貨號*	規格*
蛋白激酶A活性檢測試劑盒Ⅰ型	PKA Kinase Assay Kits, Type I	Immunechem	ICP0216	96 T
蛋白激酶A活性檢測試劑盒Ⅱ型	PKA Kinase Assay Kits, Type II	Immunechem	ICP0217	100T
蛋白激酶B活性檢測試劑盒Ⅰ型	PKB Kinase Assay Kits, Type I	Immunechem	ICP0245	96 T
蛋白激酶B活性檢測試劑盒Ⅱ型	PKB(AKT) Kinase Assay Kits, Type II	Immunechem	ICP0243	100T
蛋白激酶C活性檢測試劑盒Ⅰ型	PKC Kinase Assay Kits, Type I	Immunechem	ICP0212	96 T
蛋白激酶C活性檢測試劑盒Ⅱ型	PKC Kinase Assay Kits, Type II	Immunechem	ICP0211	100T
SGK蛋白激酶活性檢測試劑盒Ⅱ型	SGK Kinase Assay Kits, Type II	Immunechem	ICP0242	100T
S6K蛋白激酶活性檢測試劑盒Ⅰ型	S6K Kinase Assay Kits, Type I	Immunechem	ICP0255	96 T

該公司產品分類：蛋白質翻譯后修飾抗體標簽抗體乙酰化蛋白純化富集試劑盒乙酰化抗體

XMD系列數字式自動巡回檢測

·XMD系列數字式自動巡回檢測

UX-300BROHS檢測儀

產品特征

＊采用能量色散X熒光分析技術（EDXRF），實現多種元素同時測量。

＊可根據用戶的應用要求配置為從Na到U的任意多種元素。

＊采用多種措施優化光路設計和配置，了特征X射線的探測效率。

＊采用50W側窗X射線管，功耗低、壽命長，對輕重元素均有較高的激發效率。

＊基于Windows2000/XP的程序功能豐富，各種圖表和趨勢圖為決策提供最直觀的支持。數據可直接輸出到 Excel，便于進行統計分析。

＊備有基于神經網絡模型的經驗系數法建模，非常穩定。

UX-300
分析原理				能量色散X射線熒光分析法
分析元素				Na ～U任意元素
檢出下限(Cd/Pd)				Cd/Pb/Hg/Br≦2 ppm, Pb≦5 ppm
樣品形狀				任意大小，任意不規則形狀
樣品類型				塑膠/金屬/薄膜/粉末/液體
X射線管	靶材			Mo
	管電壓			5～50 kV
	管電流			最大1～1000 μA
照射直徑				2、5、8mm自動轉換
探測器				Si(PIN)半導體高分辨率探測器
濾光片				八種新型濾光片自動選擇
樣品定位				微動載物平臺（選配）
樣品觀察				30倍彩色CCD攝像機
微區分析				X光聚焦微區分析系統（選配）
軟件				定量分析：α系數法 WINDOWS XP
數據處理		主機		PC機
		內存		256 MB 以上
		硬盤		40 GB 以上
		OS		Windows XP
工作環境			溫度	10～35 ℃
			濕度	30～70%R H
電源				AC 220 V±10 %、50/60 Hz
功率				1.1kW
重量				40Kg
外形尺寸				610(W)×750(D)×500(H)mm

35110烙鐵頭接地檢測儀

烙鐵頭接地檢測儀Soldering Iron Monitor檢測烙鐵頭接地是否正常獨特的烙鐵頭電壓監測功能2節AAA電池, 也可外接電源工作PASS/FAIL LED和聲音指示烙鐵頭超過1.25V AC報警訂購編碼: 35110 品牌: MENDA制造商: Desco Industries Inc產地: 美國Soldering Iron Monitor檢測烙鐵頭接地是否正常獨特的烙鐵頭電壓監測功能2節AAA電池, 也可外接電源工作PASS/FAIL LED和聲音指示烙鐵頭超過1.25V AC報警訂購編碼: 35110 品牌: MENDA制造商: Desco Industries Inc產地: 美國

該公司產品分類：靜電測試儀

亚洲视频福利,日本精品一区二区三区在线,日韩欧美在线视频一区二区,国产高清自产拍av在线,99久久99久久精品国产片果冻,国产视频手机在线,成人禁在线观看午夜亚洲