һ���yԇ������
0.001~1N.m
0.01~10kgf.cm
0.01~9Lbf.in
�������g(sh��)����(sh��)��
�`�±0.5%
���ܣ�LC:LCDҺ���@ʾ��RS����RS232ݔ���ڣ�PO���Դ�Ԅ��P(gu��n)�]���ܣ�IO���O(sh��)���Ԅ�����
���ͳߴ磺155(W)×125(D)×55(H)
������B���^SJ10/���b��/AC�������һ��
�y����������ͨ�^�����^�������^�M(j��n)�Мy����
�a(ch��n)�أ��ձ�
�ձ�˼�_(d��)�����Ť���yԇ�x | ||||||||||||||||||||||||||||||
|
�ձ�˼�_(d��)�����Ť���yԇ�x | ||||||||||||||||||||||||||||||
|
�ձ�˼�_(d��)�����Ť���yԇ�x | ||||||||||||||||||||||||||||||
|
Ҏ(gu��)�� | CD-100 | CD-10 | |
�yԇ���� | 3.0-800.0 mNm | 0.030-8.000 N�� | |
���� | 8000-500 digit 0.5% 499-30 digit within3digit | ||
�@ʾ��λ | lbfin-kgfcm-Nm | ||
�w�� | Return to zero by pressing clear button. | ||
Data spec. | Data output | Based on RS232C Baud rate:9600 | |
Power supply | Auto power off | �Ԅ��Դ�P(gu��n)�] 10 min. | |
Battery drive | Ni-Cd 1.2V 5cells1200mAh | ||
��늕r�g | 8hrs. | ||
�B�m(x��)��늕r�g | 20hrs. | ||
�ԄӚw�� | ����ԄӚw���b�� | ||
�ߴ� | W:155D:125H:30 / 1kg | ||
���� | Measuring joint SJ10/50 | Measuring joint SJ10 |
Management of air tool / oil pulse tool |
��Torque Tester �@DI-1M-IP�@series |
![]() |
Management of an oil pulse tool etc. High precisionlightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweightsmall, it can install in a work line. Convenient for the scheduled inspection of a tool It is brightreadable at an LED display. The high luminosity (light emitting diode) LED can be adopted as a display element, and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features ��Blow counter. The total number of blows within fixed timetorque measured value are displayed. �� Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. ��RS232C Output. It connects with data printing (printer use corresponding to RS232C),a personal computer,data can be saved easily.(Taking-in soft use of exclusive use) �� It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc. |
Specification | �c�h-�P�l-�h�o�T�O | �c�h-�P�l-�h�o�Q�O�O | �c�h-�P�l-�h�o�T�O�O | |
Measuring range (at the time of Track) | 0.30�`50 N�m 3.0�`500 kgf�Ecm 3.0�`430 lbf�Ein | 3.0�`200 N�m 30�`2000 kgf�Ecm 30�`1800 lbf�Ein | 3.0�`500 N�m 30�`5000 kgf�Ecm 30�`4500 lbf�Ein | |
Peak down Operating range | 0.70N?/span>m�`, 7.0kgf�Ecm/ lbf�Ein�` | 7.0N?/span>m�`, 70kgf�Ecm/ lbf�Ein�` | ||
Accuracy | �}0.5���iF/S�j(499 or less digit�}3digit) | |||
Display | The 4 figures digital display of LED | |||
The measurement direction | CW-CCW (rightleft) | |||
Measuring mode | P-P Peak | Peak load value hold | ||
T-R Track | Indication of real time torque value. | |||
P-D Peak down | Indication peak down pointhold. | |||
Display zero clearance | Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance | |||
Blow | Measurement range | Zero to 99 blow | ||
Measurement time | 0.1 - 9.9 seconds | |||
Data output | RS232C conformity (baud rate 9600) | |||
Power supply | Ni-Cd chargeable battery 1.2V�~5cells 700mAh | |||
Auto power save | 5 minutes no use, automatically switch off. | |||
Charging time | From empty - less than 6hours | |||
Continunous working time | 8 hours | |||
Meter part�@Weight | About 600g | |||
Detection part�@Weight | about 600g | about 1kg | about 2.5kg | |
Meter part�@Outside size | 146(W)�~115(D)�~48(H) �iIt does not contain by the projection part�j | |||
Code length | Standard 1m (there are automatic machines no less than 4m as an option.) | |||
Accessories (one piece each) | Attache case | �\ | �\ | |
AC/DC adaptor (Please choose AC adaptor out of 120V,230V.) | ||||
An inspection report, a proofreading certificate, traceability system figure |
Detection machine size figure | Detection machine outside figure | |||
Form | �h�o�T�O | �h�o�Q�O�O | �h�o�T�O�O | ![]() |
�` | ��50 | ��60 | ��80 | |
�a | 63 | 73 | 99 | |
�b | 10 | 10 | 15.5 | |
�c | ��90 | ��110 | ��140 | |
�d | ��74 | ��90 | ��116 | |
�e(Three division) | ��6.3 | ��8.3 | ��10.5 | |
�f�@(Socket intuition affinity) | 9.5���� | 12.7���� | 19���� | |
Weight | 632g | 1.8kg | 3kg |
�ձ�˼�_(d��)�����Ť���yԇ�x | ||||||||||||||||||||||||||||||
|
Ҏ(gu��)�� | CD-100 | CD-10 | |
�yԇ���� | 3.0-800.0 mNm | 0.030-8.000 N�� | |
���� | 8000-500 digit 0.5% 499-30 digit within3digit | ||
�@ʾ��λ | lbfin-kgfcm-Nm | ||
�w�� | Return to zero by pressing clear button. | ||
Data spec. | Data output | Based on RS232C Baud rate:9600 | |
Power supply | Auto power off | �Ԅ��Դ�P(gu��n)�] 10 min. | |
Battery drive | Ni-Cd 1.2V 5cells1200mAh | ||
��늕r�g | 8hrs. | ||
�B�m(x��)��늕r�g | 20hrs. | ||
�ԄӚw�� | ����ԄӚw���b�� | ||
�ߴ� | W:155D:125H:30 / 1kg | ||
���� | Measuring jointSJ10/50 | Measuring jointSJ10 |
|
�ձ�˼�_(d��)�����Ť���yԇ�x | ||||||||||||||||||||||||||||||
|
Ҏ(gu��)�� | CD-100 | CD-10 | |
�yԇ���� | 3.0-800.0 mNm | 0.030-8.000 N�� | |
���� | 8000-500 digit 0.5% 499-30 digit within3digit | ||
�@ʾ��λ | lbfin-kgfcm-Nm | ||
�w�� | Return to zero by pressing clear button. | ||
Data spec. | Data output | Based on RS232C Baud rate:9600 | |
Power supply | Auto power off | �Ԅ��Դ�P(gu��n)�] 10 min. | |
Battery drive | Ni-Cd 1.2V 5cells1200mAh | ||
��늕r�g | 8hrs. | ||
�B�m(x��)��늕r�g | 20hrs. | ||
�ԄӚw�� | ����ԄӚw���b�� | ||
�ߴ� | W:155D:125H:30 / 1kg | ||
���� | Measuring jointSJ10/50 | Measuring jointSJ10 |
Management of air tool / oil pulse tool |
��Torque Tester �@DI-1M-IP�@series |
![]() |
Management of an oil pulse tool etc. High precisionlightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweightsmall, it can install in a work line. Convenient for the scheduled inspection of a tool It is brightreadable at an LED display. The high luminosity (light emitting diode) LED can be adopted as a display element, and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features ��Blow counter. The total number of blows within fixed timetorque measured value are displayed. �� Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. ��RS232C Output. It connects with data printing (printer use corresponding to RS232C),a personal computer,data can be saved easily.(Taking-in soft use of exclusive use) �� It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc. |
Specification | �c�h-�P�l-�h�o�T�O | �c�h-�P�l-�h�o�Q�O�O | �c�h-�P�l-�h�o�T�O�O | |
Measuring range (at the time of Track) | 0.30�`50 N�m 3.0�`500 kgf�Ecm 3.0�`430 lbf�Ein | 3.0�`200 N�m 30�`2000 kgf�Ecm 30�`1800 lbf�Ein | 3.0�`500 N�m 30�`5000 kgf�Ecm 30�`4500 lbf�Ein | |
Peak down Operating range | 0.70N?/span>m�`, 7.0kgf�Ecm/ lbf�Ein�` | 7.0N?/span>m�`, 70kgf�Ecm/ lbf�Ein�` | ||
Accuracy | �}0.5���iF/S�j(499 or less digit�}3digit) | |||
Display | The 4 figures digital display of LED | |||
The measurement direction | CW-CCW (rightleft) | |||
Measuring mode | P-P Peak | Peak load value hold | ||
T-R Track | Indication of real time torque value. | |||
P-D Peak down | Indication peak down pointhold. | |||
Display zero clearance | Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance | |||
Blow | Measurement range | Zero to 99 blow | ||
Measurement time | 0.1 - 9.9 seconds | |||
Data output | RS232C conformity (baud rate 9600) | |||
Power supply | Ni-Cd chargeable battery 1.2V�~5cells 700mAh | |||
Auto power save | 5 minutes no use, automatically switch off. | |||
Charging time | From empty - less than 6hours | |||
Continunous working time | 8 hours | |||
Meter part�@Weight | About 600g | |||
Detection part�@Weight | about 600g | about 1kg | about 2.5kg | |
Meter part�@Outside size | 146(W)�~115(D)�~48(H) �iIt does not contain by the projection part�j | |||
Code length | Standard 1m (there are automatic machines no less than 4m as an option.) | |||
Accessories (one piece each) | Attache case | �\ | �\ | |
AC/DC adaptor (Please choose AC adaptor out of 120V,230V.) | ||||
An inspection report, a proofreading certificate, traceability system figure |
Detection machine size figure | Detection machine outside figure | |||
Form | �h�o�T�O | �h�o�Q�O�O | �h�o�T�O�O | ![]() |
�` | ��50 | ��60 | ��80 | |
�a | 63 | 73 | 99 | |
�b | 10 | 10 | 15.5 | |
�c | ��90 | ��110 | ��140 | |
�d | ��74 | ��90 | ��116 | |
�e(Three division) | ��6.3 | ��8.3 | ��10.5 | |
�f�@(Socket intuition affinity) | 9.5���� | 12.7���� | 19���� | |
Weight | 632g | 1.8kg | 3kg |
Management of air tool / oil pulse tool |
��Torque Tester �@DI-1M-IP�@series |
![]() |
Management of an oil pulse tool etc. High precisionlightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweightsmall, it can install in a work line. Convenient for the scheduled inspection of a tool It is brightreadable at an LED display. The high luminosity (light emitting diode) LED can be adopted as a display element, and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features ��Blow counter. The total number of blows within fixed timetorque measured value are displayed. �� Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. ��RS232C Output. It connects with data printing (printer use corresponding to RS232C),a personal computer,data can be saved easily.(Taking-in soft use of exclusive use) �� It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc. |
Specification | �c�h-�P�l-�h�o�T�O | �c�h-�P�l-�h�o�Q�O�O | �c�h-�P�l-�h�o�T�O�O | |
Measuring range (at the time of Track) | 0.30�`50 N�m 3.0�`500 kgf�Ecm 3.0�`430 lbf�Ein | 3.0�`200 N�m 30�`2000 kgf�Ecm 30�`1800 lbf�Ein | 3.0�`500 N�m 30�`5000 kgf�Ecm 30�`4500 lbf�Ein | |
Peak down Operating range | 0.70N?/span>m�`, 7.0kgf�Ecm/ lbf�Ein�` | 7.0N?/span>m�`, 70kgf�Ecm/ lbf�Ein�` | ||
Accuracy | �}0.5���iF/S�j(499 or less digit�}3digit) | |||
Display | The 4 figures digital display of LED | |||
The measurement direction | CW-CCW (rightleft) | |||
Measuring mode | P-P Peak | Peak load value hold | ||
T-R Track | Indication of real time torque value. | |||
P-D Peak down | Indication peak down pointhold. | |||
Display zero clearance | Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance | |||
Blow | Measurement range | Zero to 99 blow | ||
Measurement time | 0.1 - 9.9 seconds | |||
Data output | RS232C conformity (baud rate 9600) | |||
Power supply | Ni-Cd chargeable battery 1.2V�~5cells 700mAh | |||
Auto power save | 5 minutes no use, automatically switch off. | |||
Charging time | From empty - less than 6hours | |||
Continunous working time | 8 hours | |||
Meter part�@Weight | About 600g | |||
Detection part�@Weight | about 600g | about 1kg | about 2.5kg | |
Meter part�@Outside size | 146(W)�~115(D)�~48(H) �iIt does not contain by the projection part�j | |||
Code length | Standard 1m (there are automatic machines no less than 4m as an option.) | |||
Accessories (one piece each) | Attache case | �\ | �\ | |
AC/DC adaptor (Please choose AC adaptor out of 120V,230V.) | ||||
An inspection report, a proofreading certificate, traceability system figure |
Detection machine size figure | Detection machine outside figure | |||
Form | �h�o�T�O | �h�o�Q�O�O | �h�o�T�O�O | ![]() |
�` | ��50 | ��60 | ��80 | |
�a | 63 | 73 | 99 | |
�b | 10 | 10 | 15.5 | |
�c | ��90 | ��110 | ��140 | |
�d | ��74 | ��90 | ��116 | |
�e(Three division) | ��6.3 | ��8.3 | ��10.5 | |
�f�@(Socket intuition affinity) | 9.5���� | 12.7���� | 19���� | |
Weight | 632g | 1.8kg | 3kg |