亚洲视频福利,日本精品一区二区三区在线,日韩欧美在线视频一区二区,国产高清自产拍av在线,99久久99久久精品国产片果冻,国产视频手机在线,成人禁在线观看午夜亚洲

DIS-IP200�ձ�˼�_Ť���yԇ�x

Measurement of torque driver / torque wrench
�� TORQUE TESTER �@DIS-IP series
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. �@(A Measurement modea unit. Other coded data is�@displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features �� Yes-no decision�@ �� Average calculation �� Data storage is 800 affairs. �� A convenient functional setup of a setup of a measurement start value etc. �� Data output at real time (every about 1/180 seconds).�@ �� USB terminal data output ��It is a rechargeable battery drive, the installation to the spot is also easy. ��By the auto power OFF, It prevents forgetting to turn off the power. ��One-touch zero adjustment ��An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. �@�@It is very convenient for a continuous check. ��The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D).
Specification DIS-IP05 �cIS-�h�o5 �cIS-�h�o50 �cIS-�h�o200 �cIS-�h�o500
Measuring range (at  time of Track) 2.0�`500 mN�m 0.30�`50 kgf�Ecm 0.30�`45 lbf�Ein
0.030�`5 N�m 0.30�`50 kgf�Ecm 0.30�`45 lbf�Ein
030�`50 N�m 3.0�`500 kgf�Ecm 3.0�`450 lbf�Ein
3.0�`200 N�m 30�`2000 kgf�Ecm 30�`1800 lbf�Ein
3.0�`500 N�m 30�`5000 kgf�Ecm 30�`4500 lbf�Ein
Accuracy �}0.5%     (499 or less digit�}3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat (Baud rate :19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V�~5cells �@700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories  (one piece each)
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
�` ��40 ��50 ��60 ��80
�a 41.2 63 73 99
�b 5 10 10 15.5
�c ��60 ��90 ��110 ��140
�d ��50 ��74 ��90 ��116
�e(Three division) ��4.2 ��6.3 ��8.3 ��10.5
�f�@(Socket intuition affinity) 6.35���� 9.5���� 12.7���� 19����
weight 189�� 632�� 1.8���� 3����
 

DIS-IP50�ձ�˼�_Ť���yԇ�x

Measurement of torque driver / torque wrench
�� TORQUE TESTER �@DIS-IP series
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. �@(A Measurement modea unit. Other coded data is�@displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features �� Yes-no decision�@ �� Average calculation �� Data storage is 800 affairs. �� A convenient functional setup of a setup of a measurement start value etc. �� Data output at real time (every about 1/180 seconds).�@ �� USB terminal data output ��It is a rechargeable battery drive, the installation to the spot is also easy. ��By the auto power OFF, It prevents forgetting to turn off the power. ��One-touch zero adjustment ��An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. �@�@It is very convenient for a continuous check. ��The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D).
Specification DIS-IP05 �cIS-�h�o5 �cIS-�h�o50 �cIS-�h�o200 �cIS-�h�o500
Measuring range (at  time of Track) 2.0�`500 mN�m 0.30�`50 kgf�Ecm 0.30�`45 lbf�Ein
0.030�`5 N�m 0.30�`50 kgf�Ecm 0.30�`45 lbf�Ein
030�`50 N�m 3.0�`500 kgf�Ecm 3.0�`450 lbf�Ein
3.0�`200 N�m 30�`2000 kgf�Ecm 30�`1800 lbf�Ein
3.0�`500 N�m 30�`5000 kgf�Ecm 30�`4500 lbf�Ein
Accuracy �}0.5%     (499 or less digit�}3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat (Baud rate :19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V�~5cells �@700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories  (one piece each)
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
�` ��40 ��50 ��60 ��80
�a 41.2 63 73 99
�b 5 10 10 15.5
�c ��60 ��90 ��110 ��140
�d ��50 ��74 ��90 ��116
�e(Three division) ��4.2 ��6.3 ��8.3 ��10.5
�f�@(Socket intuition affinity) 6.35���� 9.5���� 12.7���� 19����
weight 189�� 632�� 1.8���� 3����
 

DIS-IP5�ձ�˼�_Ť���yԇ�x

Measurement of torque driver / torque wrench
�� TORQUE TESTER �@DIS-IP series
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. �@(A Measurement modea unit. Other coded data is�@displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features �� Yes-no decision�@ �� Average calculation �� Data storage is 800 affairs. �� A convenient functional setup of a setup of a measurement start value etc. �� Data output at real time (every about 1/180 seconds).�@ �� USB terminal data output ��It is a rechargeable battery drive, the installation to the spot is also easy. ��By the auto power OFF, It prevents forgetting to turn off the power. ��One-touch zero adjustment ��An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. �@�@It is very convenient for a continuous check. ��The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D).
Specification DIS-IP05 �cIS-�h�o5 �cIS-�h�o50 �cIS-�h�o200 �cIS-�h�o500
Measuring range (at  time of Track) 2.0�`500 mN�m 0.30�`50 kgf�Ecm 0.30�`45 lbf�Ein
0.030�`5 N�m 0.30�`50 kgf�Ecm 0.30�`45 lbf�Ein
030�`50 N�m 3.0�`500 kgf�Ecm 3.0�`450 lbf�Ein
3.0�`200 N�m 30�`2000 kgf�Ecm 30�`1800 lbf�Ein
3.0�`500 N�m 30�`5000 kgf�Ecm 30�`4500 lbf�Ein
Accuracy �}0.5%     (499 or less digit�}3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat (Baud rate :19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V�~5cells �@700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories  (one piece each)
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
�` ��40 ��50 ��60 ��80
�a 41.2 63 73 99
�b 5 10 10 15.5
�c ��60 ��90 ��110 ��140
�d ��50 ��74 ��90 ��116
�e(Three division) ��4.2 ��6.3 ��8.3 ��10.5
�f�@(Socket intuition affinity) 6.35���� 9.5���� 12.7���� 19����
weight 189�� 632�� 1.8���� 3����
 

DIS-IPS20C�ձ�˼�_Ť���yԇ�x

Measurement of bolting machines
�� TORQUE TESTER �@DIS-IPS
Performance check of an electric driver Management of the bolting torque of an automatic line A new function is carried (1) Display Board Became Legible. �@(A Measurement modea unit. Other coded data is�@displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. Detection part is very a compact! The best for measurement of an automatic line OW join. it rewinds atis needlessness. Disply screen became large. It is very legible .It became large 1.5times. Various attachments are attached. Measurement is possible,with a bit attached. The main features �� Yes-no decision�@ �� Average calculation �� Data storage is 800 affairs. �� A convenient functional setup of a setup of a measurement start value etc. �� Data output at real time (every about 1/180 seconds).�@ �� USB terminal data output
DIS-IPS
Specification DIS-IPS20C DIS-IPS5C
Measuring range 0.20�`20 N�m �@�@2.0�`200 kgf�Ecm�@�@ 2.0�`180 lbf�Ein 0.020�`5 N?/span>m 0.20�`50 kgf�Ecm 0.20�`45 lbf�Ein
Accuracy �}0.5%     (499 or less digit�}3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword.
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch-Zero Clearance Easy Zero-Adjustment with pressing CLEAR button
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Data spec. Data transfer ASCII format (Baud rate : 19200)
Data memory 800 data stored
Power supply Ni-Cd chargeable battery 1.2V�~5cells �@700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time From empty - about 3hours
Continunous working time 12 hours
Attachment fit mouth ��20��m�@
Meter outside type dimension 100�iW�j�~105�iD�j�~33�i�g�j
Weight Meter part    520g
Attachment Fixed   Attachment�@��20�o�@M4/M5/M6/M8
OW joint�@OW-20 OW joint�@OW-10
Accessories  (one piece each) AC/DC adaptor (Please choose AC adaptor out of 120V,230V.)
An inspection report, a proofreading certificate, a traceability system figure

OW joint is a measurement end at one-touch. It binds tightmeasurement is completed only by the work of a direction. Inversion operation like the former is unnecessary.Since the fit part with a bit is the screw head, where a bit is attached, it can be measured.By the conventional method, friction of a screw part had affected the measurement result.This joint has the structure where it is not influenced of fricative,can manage torque stabilized over the long period of time

���®a(ch��n)Ʒ
���T�x���� Һ��ɫ�V�x ����ɫ�V�x ԭ�ӟɹ���V�x ��Ҋ�ֹ���Ӌ Һ�|(zh��)“(li��n)�Ãx ����ԇ�C ���Ӌ��PHӋ�� �x�ęC �����x�ęC ����x�ęC �����@΢�R �����@΢�R ��(bi��o)��(zh��n)���|(zh��) ����ԇ��