亚洲视频福利,日本精品一区二区三区在线,日韩欧美在线视频一区二区,国产高清自产拍av在线,99久久99久久精品国产片果冻,国产视频手机在线,成人禁在线观看午夜亚洲

DIS-RL6�ձ�˼�_(d��)Ť��У���x��

Bolting measurement of screwbolt
�� TORQUE TESTER �@DIS-RL series
Separate type merit! Detection part is compact.
DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled.
DIS-RL2 Measurement to 2N�Em It is easy to use measuring range widely.
DIS-RL6 Measurement to 6 N�Em  
A new function is carried (1) Display Board Became Legible. �@(A Measurement modea unit. Other coded data is�@displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge.
The main functions�@(DIS series)  �� Yes-no decision�@ �� Average calculation �� Data storage is 800 affairs. �� A convenient functional setup of a setup of a measurement start value etc. �� Data output at real time (every about 1/180 seconds).�@ �� USB terminal data output
Specification DIS-RL05 DIS-RL2 DIS-RL6
Measuring range 2.0�`500 mN�m 0.020�`5 kgf�Ecm 0.020�`4.5 lbf�Ein 0.020�`2 N�m 0.20�`20 kgf�Ecm 0.20�`18 lbf�Ein 0.20�`6 N�m 2.0�`60 kgf�Ecm 2.0�`54lbf�Ein
Accuracy �}0.5% (or less 499�}3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword  
C Real-time output Load torque value is outputted every about1/ 180 second by RS232C.
Decision function Setting of torque value A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
clearance It is a display clearance in set-up time.   (0.5 - 3.0 sec)
One-touch zero A clear button is pushedit is a zero. data output.
Data spec. Data transfer ASCII format (Baud rate : 19200)
Data memory 800 data stored
Power supply Ni-Cd chargeable battery 1.2V�~4cells �@450mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3hours
Continunous working time 10 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Bit/Socket part ��4 HEX 6.35
Accessories  (one piece each)
 ��4 bits (�{)�@��0/��1 6.35HEX bits (�{)�@��1/��2
Receipt case
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

DIS-RL2�ձ�˼�_(d��)Ť��У���x��

Bolting measurement of screwbolt
�� TORQUE TESTER �@DIS-RL series
Separate type merit! Detection part is compact.
DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled.
DIS-RL2 Measurement to 2N�Em It is easy to use measuring range widely.
DIS-RL6 Measurement to 6 N�Em  
A new function is carried (1) Display Board Became Legible. �@(A Measurement modea unit. Other coded data is�@displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge.
The main functions�@(DIS series)  �� Yes-no decision�@ �� Average calculation �� Data storage is 800 affairs. �� A convenient functional setup of a setup of a measurement start value etc. �� Data output at real time (every about 1/180 seconds).�@ �� USB terminal data output
Specification DIS-RL05 DIS-RL2 DIS-RL6
Measuring range 2.0�`500 mN�m 0.020�`5 kgf�Ecm 0.020�`4.5 lbf�Ein 0.020�`2 N�m 0.20�`20 kgf�Ecm 0.20�`18 lbf�Ein 0.20�`6 N�m 2.0�`60 kgf�Ecm 2.0�`54lbf�Ein
Accuracy �}0.5% (or less 499�}3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword  
C Real-time output Load torque value is outputted every about1/ 180 second by RS232C.
Decision function Setting of torque value A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
clearance It is a display clearance in set-up time.   (0.5 - 3.0 sec)
One-touch zero A clear button is pushedit is a zero. data output.
Data spec. Data transfer ASCII format (Baud rate : 19200)
Data memory 800 data stored
Power supply Ni-Cd chargeable battery 1.2V�~4cells �@450mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3hours
Continunous working time 10 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Bit/Socket part ��4 HEX 6.35
Accessories  (one piece each)
 ��4 bits (�{)�@��0/��1 6.35HEX bits (�{)�@��1/��2
Receipt case
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

DIS-RL05�ձ�˼�_(d��)Ť��У���x��

Bolting measurement of screwbolt
�� TORQUE TESTER �@DIS-RL series
Separate type merit! Detection part is compact.
DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled.
DIS-RL2 Measurement to 2N�Em It is easy to use measuring range widely.
DIS-RL6 Measurement to 6 N�Em  
A new function is carried (1) Display Board Became Legible. �@(A Measurement modea unit. Other coded data is�@displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge.
The main functions�@(DIS series)  �� Yes-no decision�@ �� Average calculation �� Data storage is 800 affairs. �� A convenient functional setup of a setup of a measurement start value etc. �� Data output at real time (every about 1/180 seconds).�@ �� USB terminal data output
Specification DIS-RL05 DIS-RL2 DIS-RL6
Measuring range 2.0�`500 mN�m 0.020�`5 kgf�Ecm 0.020�`4.5 lbf�Ein 0.020�`2 N�m 0.20�`20 kgf�Ecm 0.20�`18 lbf�Ein 0.20�`6 N�m 2.0�`60 kgf�Ecm 2.0�`54lbf�Ein
Accuracy �}0.5% (or less 499�}3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword  
C Real-time output Load torque value is outputted every about1/ 180 second by RS232C.
Decision function Setting of torque value A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
clearance It is a display clearance in set-up time.   (0.5 - 3.0 sec)
One-touch zero A clear button is pushedit is a zero. data output.
Data spec. Data transfer ASCII format (Baud rate : 19200)
Data memory 800 data stored
Power supply Ni-Cd chargeable battery 1.2V�~4cells �@450mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3hours
Continunous working time 10 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Bit/Socket part ��4 HEX 6.35
Accessories  (one piece each)
 ��4 bits (�{)�@��0/��1 6.35HEX bits (�{)�@��1/��2
Receipt case
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

�ձ�˼�_(d��)��DI-3N-IP50/DI-3N-IP200Ť��У���x�ձ�˼�_(d��)��DI-3N-IP50/DI-3N-IP200Ť��У���x

Ť��У���xDI-3N-IP5/IP50/IP200/IP500
�� �� �̣�˼�_(d��)(CEDAR)
�a(ch��n)Ʒ�N��y���������x��
�����ИI(y��)����Ӽ��·�幤�I(y��)ģ�߼���������ИI(y��)
  �a(ch��n)Ʒ  ���u�a(ch��n)Ʒ  
�a(ch��n)Ʒ���飺
 Ԕ��(x��)��(n��i)��
�ձ�˼�_(d��)��Ť��У���x

��̖

DI-3N-IP5

DI-3N-IP50

DI-3N-IP200

DI-3N-IP500

DI-3N-IPS

�y������

0.01��5N.m0.1��50kgf.cm0.1��45Lbf.in

0.01��50N.m0.1��500kgf.cm0. 1��450Lbf.in

0.1��200N.m1��2000kgf.cm1��1800Lbf.in

0.1��500N.m1��5000kgf.cm0.1��4500Lbf.in

0.01��20N.m0.1��200kgf.cm0.1��180Lbf.in

�`��

��0.5%

����

LC:LCD�@ʾ��RS��RS232Cݔ������LH��Ť���O(sh��)��������MY����(sh��)��(j��)ӛ������PO���Դ�Ԅ��P(gu��n)�]����IO���O(sh��)���Ԅ�����

���γߴ�

88(W)��108(D)��40(H)�������y�^��

���

���b��/AC�������һ��

AC�������һ��

�y���^1��DC20mmM4/M6/M8���b��AC�������һ��

DIS-RL05�ձ�˼�_(d��)Ť��У���x��

Bolting measurement of screwbolt
�� TORQUE TESTER �@DIS-RL series
Separate type merit! Detection part is compact.
DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled.
DIS-RL2 Measurement to 2N�Em It is easy to use measuring range widely.
DIS-RL6 Measurement to 6 N�Em  
A new function is carried (1) Display Board Became Legible. �@(A Measurement modea unit. Other coded data is�@displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge.
The main functions�@(DIS series)  �� Yes-no decision�@ �� Average calculation �� Data storage is 800 affairs. �� A convenient functional setup of a setup of a measurement start value etc. �� Data output at real time (every about 1/180 seconds).�@ �� USB terminal data output
Specification DIS-RL05 DIS-RL2 DIS-RL6
Measuring range 2.0�`500 mN�m 0.020�`5 kgf�Ecm 0.020�`4.5 lbf�Ein 0.020�`2 N�m 0.20�`20 kgf�Ecm 0.20�`18 lbf�Ein 0.20�`6 N�m 2.0�`60 kgf�Ecm 2.0�`54lbf�Ein
Accuracy �}0.5% (or less 499�}3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword  
C Real-time output Load torque value is outputted every about1/ 180 second by RS232C.
Decision function Setting of torque value A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
clearance It is a display clearance in set-up time.   (0.5 - 3.0 sec)
One-touch zero A clear button is pushedit is a zero. data output.
Data spec. Data transfer ASCII format (Baud rate : 19200)
Data memory 800 data stored
Power supply Ni-Cd chargeable battery 1.2V�~4cells �@450mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3hours
Continunous working time 10 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Bit/Socket part ��4 HEX 6.35
Accessories  (one piece each)
 ��4 bits (�{)�@��0/��1 6.35HEX bits (�{)�@��1/��2
Receipt case
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

ԓ��˾�a(ch��n)Ʒ��� ϲ���� �׏�Ҏ(gu��) ���� EISEN�����Ҏ(gu��) FSK����ˮƽ�x RIKEN����ˮƽ�x RSK����ˮƽ�x ONO SEIKIСҰ�D(zhu��n)��Ӌ(j��) ASKER���zӲ��Ӌ(j��) TECLOCK�Ø����zӲ��Ӌ(j��) ANRITSU������Ӌ(j��) PTC����ض�Ӌ(j��) ISUZU�|���ض�Ӌ(j��) SATO�����؝��Ӌ(j��) SK ���a(ch��n)�Ŵ��R OTSUKA��ڣ�_�Ŵ��R PEAK�Ŵ��R ����Ӌ(j��) Ť������ ������Ӌ(j��)

DI-RL05CEDAR˼�_(d��)Ť��У���x��

Bolting measurement of screwbolt
�� TORQUE TESTER �@DIS-RL series
Separate type merit! Detection part is compact.
DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled.
DIS-RL2 Measurement to 2N�Em It is easy to use measuring range widely.
DIS-RL6 Measurement to 6 N�Em  
A new function is carried ��1�� Display Board Became Legible. �@��A Measurement modea unit. Other coded data is�@displayed.�� ��2�� Fault charge protection loading. It is pilot-lamp lighting during charge.
The main functions�@��DIS series��  �� Yes-no decision�@ �� Average calculation �� Data storage is 800 affairs. �� A convenient functional setup of a setup of a measurement start value etc. �� Data output at real time ��every about 1/180 seconds��.�@ �� USB terminal data output
Specification DIS-RL05 DIS-RL2 DIS-RL6
Measuring range 2.0�`500 mN�m 0.020�`5 kgf�Ecm 0.020�`4.5 lbf�Ein 0.020�`2 N�m 0.20�`20 kgf�Ecm 0.20�`18 lbf�Ein 0.20�`6 N�m 2.0�`60 kgf�Ecm 2.0�`54lbf�Ein
Accuracy �}0.5% ��or less 499�}3digit��
Display The 4 figures digital display of LCD
The measurement direction CW-CCW ��rightleft��
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword  
C Real-time output Load torque value is outputted every about1/ 180 second by RS232C.
Decision function Setting of torque value A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
clearance It is a display clearance in set-up time.   ��0.5 - 3.0 sec��
One-touch zero A clear button is pushedit is a zero. data output.
Data spec. Data transfer ASCII format ��Baud rate : 19200��
Data memory 800 data stored
Power supply Ni-Cd chargeable battery 1.2V�~4cells �@450mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3hours
Continunous working time 10 hours
Meter outside type dimension 100��W�� x105��D�� x33 ��H�� ��It does not contain by the projection thing.��
Weight Meter part    520g
Bit/Socket part ��4 HEX 6.35
Accessories  ��one piece each��
 ��4 bits ���{���@��0/��1 6.35HEX bits ���{���@��1/��2
Receipt case
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

���®a(ch��n)Ʒ
���T�x���� Һ��ɫ�V�x ����ɫ�V�x ԭ�ӟɹ���V�x ��Ҋ�ֹ���Ӌ(j��) Һ�|(zh��)“(li��n)�Ãx ����ԇ�(y��n)�C(j��) ���Ӌ(j��)��PHӋ(j��)�� �x�ęC(j��) �����x�ęC(j��) ����x�ęC(j��) �����@΢�R �����@΢�R ��(bi��o)��(zh��n)���|(zh��) ����ԇ��